0.76" ID X 1.08" OD NYLON WASHER by Datex-Ohmeda
OEM#: 6600-0925-4000.76" ID X 1.08" OD NYLON WASHER by Datex-Ohmeda
Drop Shipped From GE - Not For Export Out Of US
The Nylon Washer is made up of Nylatron which is a trademark of Quadrant, is a Nylon 6/6 and Nylon MDS blend that is self-lubricating and therefore has very low surface friction. When require spacing components that are non-metal, notably wear-resistant, and suitable for use in heavy duty applications, Nylatron washers may be one of the more suitable options among nylon-plastic based spacers. We stamp these washers from genuine Nylatron and offer them in a wide range of dimensions and thicknesses. It is used in applications where lubricants are not suitable for various safeties or practical reasons. Nylatron washers are used in several high-stress applications such as rotary level actuators of unusual geometries, heavy duty caster wheels (replacing cast iron or forged steel), wear pads and bearings. The addition of particles of molybdenum disulfide enhances the surface lubricity and wear resistance over unfilled nylon. In stamped washer and spacer applications requiring high lubricity, this material may be a good candidate. In addition to the greater lubricity, there are many additional property enhancements that occur.
- Low surface friction
- Increased surface hardness
- Increased heat resistance
- Higher tensile properties
- Improved dimensional stability
- High machinability for creating complex geometries
- Light weight construction
- Noise reduction during operation
- Excellent corrosion resistance
- Can be fixed and removed easily
- Good bearing and anti-frictional properties
- Higher relative wear life than competing premium wear grade materials
The Nylon Washer is made up of Nylatron which is a trademark of Quadrant, is a Nylon 6/6 and Nylon MDS blend that is self-lubricating and therefore has very low surface friction. When require spacing components that are non-metal, notably wear-resistant, and suitable for use in heavy duty applications, Nylatron washers may be one of the more suitable options among nylon-plastic based spacers. We stamp these washers from genuine Nylatron and offer them in a wide range of dimensions and thicknesses. It is used in applications where lubricants are not suitable for various safeties or practical reasons. Nylatron washers are used in several high-stress applications such as rotary level actuators of unusual geometries, heavy duty caster wheels (replacing cast iron or forged steel), wear pads and bearings. The addition of particles of molybdenum disulfide enhances the surface lubricity and wear resistance over unfilled nylon. In stamped washer and spacer applications requiring high lubricity, this material may be a good candidate. In addition to the greater lubricity, there are many additional property enhancements that occur.
- Low surface friction
- Increased surface hardness
- Increased heat resistance
- Higher tensile properties
- Improved dimensional stability
- High machinability for creating complex geometries
- Light weight construction
- Noise reduction during operation
- Excellent corrosion resistance
- Can be fixed and removed easily
- Good bearing and anti-frictional properties
- Higher relative wear life than competing premium wear grade materials
- Datex-Ohmeda
- GIRAFFE OMNIBED
The Nylon Washer is made up of Nylatron which is a trademark of Quadrant, is a Nylon 6/6 and Nylon MDS blend that is self-lubricating and therefore has very low surface friction. When require spacing components that are non-metal, notably wear-resistant, and suitable for use in heavy duty applications, Nylatron washers may be one of the more suitable options among nylon-plastic based spacers. We stamp these washers from genuine Nylatron and offer them in a wide range of dimensions and thicknesses. It is used in applications where lubricants are not suitable for various safeties or practical reasons. Nylatron washers are used in several high-stress applications such as rotary level actuators of unusual geometries, heavy duty caster wheels (replacing cast iron or forged steel), wear pads and bearings. The addition of particles of molybdenum disulfide enhances the surface lubricity and wear resistance over unfilled nylon. In stamped washer and spacer applications requiring high lubricity, this material may be a good candidate. In addition to the greater lubricity, there are many additional property enhancements that occur.
- Low surface friction
- Increased surface hardness
- Increased heat resistance
- Higher tensile properties
- Improved dimensional stability
- High machinability for creating complex geometries
- Light weight construction
- Noise reduction during operation
- Excellent corrosion resistance
- Can be fixed and removed easily
- Good bearing and anti-frictional properties
- Higher relative wear life than competing premium wear grade materials
The Nylon Washer is made up of Nylatron which is a trademark of Quadrant, is a Nylon 6/6 and Nylon MDS blend that is self-lubricating and therefore has very low surface friction. When require spacing components that are non-metal, notably wear-resistant, and suitable for use in heavy duty applications, Nylatron washers may be one of the more suitable options among nylon-plastic based spacers. We stamp these washers from genuine Nylatron and offer them in a wide range of dimensions and thicknesses. It is used in applications where lubricants are not suitable for various safeties or practical reasons. Nylatron washers are used in several high-stress applications such as rotary level actuators of unusual geometries, heavy duty caster wheels (replacing cast iron or forged steel), wear pads and bearings. The addition of particles of molybdenum disulfide enhances the surface lubricity and wear resistance over unfilled nylon. In stamped washer and spacer applications requiring high lubricity, this material may be a good candidate. In addition to the greater lubricity, there are many additional property enhancements that occur.
- Low surface friction
- Increased surface hardness
- Increased heat resistance
- Higher tensile properties
- Improved dimensional stability
- High machinability for creating complex geometries
- Light weight construction
- Noise reduction during operation
- Excellent corrosion resistance
- Can be fixed and removed easily
- Good bearing and anti-frictional properties
- Higher relative wear life than competing premium wear grade materials
- Datex-Ohmeda
- GIRAFFE OMNIBED
The Nylon Washer is made up of Nylatron which is a trademark of Quadrant, is a Nylon 6/6 and Nylon MDS blend that is self-lubricating and therefore has very low surface friction. When require spacing components that are non-metal, notably wear-resistant, and suitable for use in heavy duty applications, Nylatron washers may be one of the more suitable options among nylon-plastic based spacers. We stamp these washers from genuine Nylatron and offer them in a wide range of dimensions and thicknesses. It is used in applications where lubricants are not suitable for various safeties or practical reasons. Nylatron washers are used in several high-stress applications such as rotary level actuators of unusual geometries, heavy duty caster wheels (replacing cast iron or forged steel), wear pads and bearings. The addition of particles of molybdenum disulfide enhances the surface lubricity and wear resistance over unfilled nylon. In stamped washer and spacer applications requiring high lubricity, this material may be a good candidate. In addition to the greater lubricity, there are many additional property enhancements that occur.
- Low surface friction
- Increased surface hardness
- Increased heat resistance
- Higher tensile properties
- Improved dimensional stability
- High machinability for creating complex geometries
- Light weight construction
- Noise reduction during operation
- Excellent corrosion resistance
- Can be fixed and removed easily
- Good bearing and anti-frictional properties
- Higher relative wear life than competing premium wear grade materials
The Nylon Washer is made up of Nylatron which is a trademark of Quadrant, is a Nylon 6/6 and Nylon MDS blend that is self-lubricating and therefore has very low surface friction. When require spacing components that are non-metal, notably wear-resistant, and suitable for use in heavy duty applications, Nylatron washers may be one of the more suitable options among nylon-plastic based spacers. We stamp these washers from genuine Nylatron and offer them in a wide range of dimensions and thicknesses. It is used in applications where lubricants are not suitable for various safeties or practical reasons. Nylatron washers are used in several high-stress applications such as rotary level actuators of unusual geometries, heavy duty caster wheels (replacing cast iron or forged steel), wear pads and bearings. The addition of particles of molybdenum disulfide enhances the surface lubricity and wear resistance over unfilled nylon. In stamped washer and spacer applications requiring high lubricity, this material may be a good candidate. In addition to the greater lubricity, there are many additional property enhancements that occur.
- Low surface friction
- Increased surface hardness
- Increased heat resistance
- Higher tensile properties
- Improved dimensional stability
- High machinability for creating complex geometries
- Light weight construction
- Noise reduction during operation
- Excellent corrosion resistance
- Can be fixed and removed easily
- Good bearing and anti-frictional properties
- Higher relative wear life than competing premium wear grade materials
- Datex-Ohmeda
- GIRAFFE OMNIBED